System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports
195 Products
Filter
- Description
- Thread-forming bolt for use when assembling MT girder structures, for outdoor use with low pollution
- Material composition
- High Strength Steel
- Surface finish
- Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Wing nut for connecting threaded elements directly to MT box profiles in moderately corrosive environments
- Material composition
- Nut: C4C - EN 10263-2, PA66
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Angle bracket for assembling light-duty strut channel structures
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Material thickness
- 6 mm
- Description
- Angle bracket for assembling light-duty strut channel structures, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Elongated angle bracket for assembling strut channel structures, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Wing fitting for assembling strut channel structures
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Wing fitting for assembling strut channel structures, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Right-angle connector for assembling strut channel structures
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Right-angle connector for assembling strut channel structures, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Right-angle, elongated connector for assembling strut channel structures, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Node for assembling strut channels in a T shape
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Double wing fitting for connecting three strut channels in a 3D structure
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Elongated angle bracket for assembling strut channel structures
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Right-angle, elongated connector for assembling strut channel structures
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Node for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable angle bracket for assembling strut channels in a T shape
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Adjustable angle bracket for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Adjustable, braced angle bracket for heavy-duty MT girder structures subject to 3D loading, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Braced angle bracket for heavy-duty strut channel structures subject to 3D loads, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flange for constructing T-beams using MT girders, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Gusset plate for L-shaped connections with MT-70 and MT-80 girders, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Gusset plate for T-shaped connections with MT-70 and MT-80 girders, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Gusset plate for T-shaped connections with MT-80, MT-90 or MT-100 girders, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Splice connector for coupling MT-90 or MT-100 girders end-to-end, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Splice connector for coupling MT-70 or MT-80 girders end-to-end, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring light-duty strut channel structures to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for anchoring light-duty strut channel structures to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for anchoring strut channel structures to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for anchoring strut channel structures to concrete and steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring MT-70 and MT-80 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Beam clamp for fastening MT-70 and MT-80 girders to steel beams, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- 45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Adjustable brace fitting for assembling MT girder structures, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hexagon bolt for use with Twist-Locks when assembling strut channel structures
- Material composition
- ISO 898-1 8.8
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hexagon bolt for use with Twist-Locks when assembling strut channel structures, for outdoor use with low pollution
- Material composition
- ISO 898-1 8.8
- Surface finish
- Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Nut for attaching media to MT strut channels
- Material composition
- High Strength Steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Nut for attaching media to MT strut channels, for outdoor use with low pollution
- Material composition
- High Strength Steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- 45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- 45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Post base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Fixation plate with threaded hole for attaching media to strut channels
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Slotted angle plate for attaching media to MT girders, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Fixation plate with threaded hole for attaching media to strut channels
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Braced angle bracket for heavy-duty MT girder structures subject to 3D loads, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable, braced angle bracket for girder and strut channel structures subject to 3D loading, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat cross channel connector for fastening three MT channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT strut channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Splice connector for coupling MT-60 strut channels end-to-end
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Splice connector for coupling MT-60 strut channels end-to-end, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
New
- Description
- Grade 8.8 bolt with square washer used for assembling raised floor systems in dry, indoor environments
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)