Installation channel
- Height: 20.6 mm
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
KWD 3.180
Installation channel
- Height: 31 mm
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
KWD 26.040
Installation channel
- Height: 41.3 mm
- Material thickness: 2.0 mm
- Material composition: S250GD - DIN EN 10346
KWD 4.800
Double installation channel
- Height: 82.6 mm
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
KWD 55.440
Installation channel
- Height: 41.3 mm
- Material thickness: 3 mm
- Material composition: S250GD - DIN EN 10346
KWD 52.080
Installation channel
- Height: 41.2 mm
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
KWD 69.720
Installation channel
- Height: 52 mm
- Material thickness: 2.5 mm
- Material composition: S250GD - DIN EN 10346
KWD 50.610
Double installation channel
- Height: 124 mm
- Material thickness: 2.5 mm, 2.75 mm
- Material composition: S250GD - DIN EN 10346
Installation channel
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: S250GD - DIN EN 10346
KWD 71.820
Channel end cap
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
From
KWD 0.090
Rubber inlay
- Material composition: EPDM
- Surface finish: Not galvanized
- Temperature resistance: -40 - 110 °C
KWD 73.500
Bracket
- Material thickness: Channel: 2 mm, Baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
From
KWD 8.050
Double bracket
- Material thickness: Channel: 2 mm, Baseplate: 10 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
KWD 34.020
Bracket
- Material thickness: Channel: 3 mm, Baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
KWD 13.440
Bracket
- Material thickness: Channel: 2.75 mm, Baseplate: 10 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
KWD 19.670
Angle brace
- Material thickness: 3 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
From
KWD 8.120
MQN
Premium
Channel connector
- Product class: Premium
- Tightening torque: 40 Nm
- Thread connection - M: M10
KWD 1.030
MQA
Premium
Pipe ring saddle with adapter (imperial)
- Product class: Premium
- Tightening torque: 31 Nm
- Thread connection - M: 1/2 in
KWD 3.230
MQA
Premium
Pipe ring saddle
- Product class: Premium
- Material composition: Nut: QStE 380 TM, SEW 92, Plate: DD11 - DIN EN 10111, Plastic: PA 6.6
- Surface finish: Electrogalvanized - for dry indoor use only
From
KWD 0.780
MQA
Premium
Pipe ring saddle (imperial)
- Product class: Premium
- Tightening torque: 40 Nm
- Thread connection - M: 5/8 in
KWD 1.790
Wing nut
- Material composition: Wings: plastic PA, Nut: S355MC - DIN EN 10149-2
- Surface finish: Electrogalvanized - for dry indoor use only
From
KWD 0.530
Solid wing nut
- Tightening torque: 40 Nm
- Thread connection - M: M12
- Material composition: Wings: plastic PA, Nut: C4C - DIN EN 10263
KWD 0.960
Drilled plate
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
From
KWD 0.360
Installation washer
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Weight: 27 g
MQA-B
Premium
Pipe ring saddle
- Product class: Premium
- Material composition: Nut: GTW45, DIN 1692, Plate: S 235 JRG2 - DIN EN 10025, Plastic: PBT
- Surface finish: Electrogalvanized - for dry indoor use only
From
KWD 0.950
Preassembled angle
- Wrench size: 17 mm
- Tightening torque: 40 Nm
- Material composition: Angle: DD11 - DIN EN 10111, Bolt: M10 grade 8.8 - DIN ISO 898
KWD 2.890
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 6 mm
KWD 1.750
Angle
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Number of holes: 8
KWD 4.410
Angle bracket
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 10.570
Channel tie
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
From
KWD 10.360
Rail support
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 2.760
Connector 2-D
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 2.730
Connector 3-D
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 5.740
Rail support
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: Channel connector: 4 mm, Baseplate: 6 mm
KWD 4.410
Rail support
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
From
KWD 0.740
Rail support
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 1.910
Rail support
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 2.560
Universal joint
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 5 mm
From
KWD 4.620
Clamp (channel to channel)
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
From
KWD 2.060
Clamp (channel to concrete)
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 2.510
Beam clamp
- Material composition: Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025, Nut - DIN 50961
- Surface finish: Electrogalvanized - for dry indoor use only
From
KWD 4.090
Beam clamp
- Tightening torque: 20 Nm
- Material composition: EN-GJMB-350-10 - DIN EN 1562
- Surface finish: Electrogalvanized - for dry indoor use only
KWD 15.540
Clamping claw
- Tightening torque: 40 Nm
- Material composition: GJMW400-5 - EN 1562
- Surface finish: Electrogalvanized - for dry indoor use only
From
KWD 1.930
Turnbuckle
- Material composition: S235JRG2 - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Weight: 314 g
Pivot base
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 9.450
3D-system
- Wrench size: 17 mm
- Tightening torque: 40 Nm
- Surface finish: Electrogalvanized - for dry indoor use only
From
KWD 2.170
Channel tie, shear brace
- Tightening torque: 20 Nm
- Thread connection - M: M10
- Material composition: S235JR - DIN EN 10025
KWD 1.730
Installation wrench
- Fire resistance (yes/no): No
- Required material grade: n/a
- Material composition: Steel
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: Channel connector: 4 mm, Baseplate: 8 mm
KWD 20.510
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: Channel connector: 4 mm, Baseplate: 8 mm
KWD 13.370
Galvanised flexible channel connector used as a longitudinal extender for MQ strut channels
- Material composition: S235JRG2 - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 3.510
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 1.390
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 1.930
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 2.420
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 1.000
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Number of holes: 3
KWD 0.950
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Number of holes: 2
KWD 1.370
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: Channel connector: 4 mm, Baseplate: 6 mm
KWD 8.610
Galvanised flexible channel connector for two-dimensional structures
- Material composition: S235JR - DIN EN 10025
- Surface finish: Electrogalvanized - for dry indoor use only
- Material thickness: 4 mm
KWD 5.390