Cut deeper
Concrete
Make cuts up to 150 mm in concrete with a 360 mm blade using a DSH 900-22 battery cut-off saw.
Concrete saws
Cut more than you think
Cut to size
Masonry
Make light work of bricks and blocks with our DSH 600-22 and DSH 700-22 battery cut-off saws.
Cut with power
Asphalt
Get up to 20% more power with new model DSH 700-22 battery cut-off saw.
Cut safer
Metal
For safer cuts, use our extra long-lasting SPX metal cutting disc.
Cut deeper
Concrete
Make cuts up to 150 mm in concrete with a 360 mm blade using a DSH 900-22 battery cut-off saw.
Cut to size
Masonry
Make light work of bricks and blocks with our DSH 600-22 and DSH 700-22 battery cut-off saws.
Cut with power
Asphalt
Get up to 20% more power with new model DSH 700-22 battery cut-off saw.
Cut safer
Metal
For safer cuts, use our extra long-lasting SPX metal cutting disc.
Designed for productivity and safety
Increased drop and kickback protection
Unique 3D Active Torque Control (ATC) for battery saws stops tool in ≤ 1 second
Fast-acting blade brake
Stops battery saw discs spinning in ≤ 4 seconds after trigger release
Virtually dust-free cutting
The DWP 15-22 water pump suppresses dust to within allowable limits – ideal for battery saws
Total system performance
Get up to 30% more work per charge for battery saws with battery-optimized blades
Save over one ton in CO2 emissions per year with the battery-powered DSH 600-22.¹
BATTERY OR GAS
Pick your power source
No matter what your cutting task, we have the heavy-duty performance and power you need. Choose battery cut-off saws on the Nuron platform for both indoor and outdoor work when you’re cutting the equivalent of 1–2 gas tanks a day. Go with gas saws when you’re using two or more gas tanks a day in locations where you don’t have access to power and can’t plug in your chargers.
Battery
What you can do with 2x2 batteries*
Up to
22
Up to
95
When to use gas
2 or more gas tanks / day
When you need continuous power
* Based on internal testing with:
DSH 600-22 ATC and DSH 700-22 ATC battery-powered cut-off saws. Figures shown are based on using 2x2 B 22-290 Nuron batteries and 300 mm SPX Universal A blade. For curbstones, height was 300 mm and width was 100 mm. For rebar, 16 mm rebar (size 5) was used. Jobsite conditions, such as temperature, humidity, dust levels, and materials being worked on, can significantly affect the maximum amount of work possible with one battery charge.
“No fuel mix issues. No broken pull cords. Plus the longer tool life. Going with battery cut-off saws was an easy choice.”
Power up your tool park
FAQs
(1) Based on use of two sets of two B 22-290 batteries and 2x C8-22 230V chargers for 6 hours a week and 2.4 tank refills per hour for the DSH 600-X gas cut-off saws. (2) It is at Hilti’s sole discretion whether to repair or replace the tool or refund the tool purchase price, if spare parts are unavailable. Customer’s mandatory statutory warranty rights in case of product defects remain unaffected. (3) No Cost Coverage: Some exceptions apply. Reach out to your Account Manager to find out more.
Please note that damage due to abuse, or use not in accordance with the tool operator’s manual are not covered and are charged.
(4) 3-Day Repair Period: While Hilti will aim to get your tools back to you within the stated 3 day period, turnaround times are not guaranteed and any claims in case of longer repair periods are excluded. Hilti is not liable for any damages or losses caused by later delivery of the repaired tool.
Get your cut-off saw